February 7, 2025, 10:42 pm | Read time: 2 minutes
To save electricity, it is helpful to take good care of your household appliances. In refrigerators, for example, the rubber seal is often overlooked. Yet, it is fundamentally important for the performance of the appliance. You can maintain the seal with a simple household remedy so that it remains functional for longer.
The rubber seals on the refrigerator door should be maintained regularly to keep them soft and supple. However, you don’t need any special products for this. Quite the opposite: even a simple household remedy can help to keep the refrigerator seal in top condition.
Treat the Rubber Seal with Baby Powder
The “Too good for the garbage can!” initiative advises rubbing the rubber of the fridge seal with a little baby powder after cleaning. This keeps the seal working for longer. The rubber seals should be cleaned regularly, just like the inside of the fridge. Do not use vinegar cleaner for this, as this can damage the material.
Clean the Fridge Seal Regularly
The initiative also advises cleaning the inside of the fridge every four weeks on average. The interior can be kept germ-free even without aggressive cleaning agents or disinfectants. Over 90 percent of surface germs, dirt, and grease can be removed with a fresh cloth. Add some mild all-purpose cleaner, vinegar, or washing-up liquid to the warm cleaning water – a splash is enough. Before refilling the refrigerator, wipe the interior dry.
Effective Germ Killers The Three Cleaning Products You Really Need
Bad Odor Musty-Smelling Bed Linen in the Wardrobe? What You Can Do
"Easy DIY" How to easily remove silicone sealant
Replacing the Fridge Seal – Here’s How
If the rubber seal is porous and therefore no longer functional, you can easily replace it. First, remove the old seal. As a rule, you don’t even need tools for this. Now clean the groove thoroughly with a little water and washing-up liquid. Then dry well and insert the new refrigerator seal. It is best to start at one corner and work your way forward bit by bit. It is important that the seal is positioned correctly in the groove so that it can fulfill its purpose. Simply open and close the refrigerator a few times – this will show you whether the rubber is properly seated.